FPGA:
	Pin 2: TMS unconnected
	pin 137: labeled power in symbol, actually ground
	pin 129: labeled power in symbol, actually IO

PROM footprint wrong (should be TSOP-20)

Oscillator:
	power wrong voltage
	enable wrong polarity

ADC Vref needs to be bypassed (.1uF)

-5V reg sense resistors swapped

2.5V reg sense resistors swapped

power jack polarity wrong

need manual reset switch

Load Switch pinout incorrect in symbol

Top panel mounting screw in wrong place

longer pads on all SMT footprints

Switch RCA jacks to SMA